Filter
Top Products
Tally T8006e Color Laser Printers User Guide
14
Setting the Fuser Cleaning Roller Counter to Zero
Printer software tracks fuser cleaner roller usage. After the counter
reaches a pre-set number, the printer displays a message to indicate that
maintenance is necessary.
Whenever replacing the fuser cleaning roller the counter has to be set to
zero as detailed below.
1. Take the printer off line, by pressing the
ONLINE key. Press and hold the
MENU/ENTER/. The printer
shows test mode, keep pressing the
menu key until printer says utility menu.
Release the menu key and press it once.
2. Printer shows utility Menu clear FC
roller.
3. Press MENU/ENTER/ . The dis-
play will show Clear FC. Roll Not
Execute.
4. Press either TRAY/or MEDIA/
until the display shows Clear FC. Roll
Execute.
5. Press MENU/ENTER/ once, and after approximately 10 seconds,
the display will show Completed Clear FC. Roll.
6. Press the key three times to exit the utility menu and then press the
online key. Or turn the printer off.
NoteFor more information about displayed error messages, see “Appendix D Control
Panel Messages” on page 147.