Filter
Top Products
61
Chapter 6
Maintaining Your Printer
When supplies such as toner cartridges and fuser oil need replacement,
and when printer parts need replacement after high-volume printing, the
control panel displays messages.
See “Chapter 4 Operating Your Printer” on page 35, and “Appendix D
Control Panel Messages” on page 147for more information about control
panel messages.
Printer parts must be replaced by a qualified Tally Service Technician. For
more information on part replacement, see “Appendix B Periodic
Replacement Parts” on page 113.
For more information about supply orders, see the Tally T8006e Color
Laser Printers Quick Start Guide on the Tally CD-ROM.
Perform the following steps to replenish the supplies in your printer.
Warning! Make sure the power switch is off, and that the printer has
cooled for a minimum of 30 minutes before replacing the fuser consumables.
Replacing Toner Cartridges
Replace toner cartridges at least once every 12 months, or more often
depending on usage. At a 5% coverage rate and continuous printing of
letter-size paper, T8006e toner cartridges can print about 12,000 pages for
black (K), and 7,200 pages for color (C, M and Y).
Note: The original toner cartridges from the Starter Kit are filled at half
volume for first-time installation only. Their early replacement does not reflect
the replacement cycle stated above.
Warning! If you get toner in your eyes, immediately flush your eyes with water for at
least 15 minutes, and contact a physician.