Filter
Top Products
Chapter 4 Operating Your Printer
37
Loading Media
When loading paper or transparencies into your printer, do not load too
much and make sure that the media is all the same size. Loading beyond
the specified capacity will cause paper jams. When using transparencies
ensure that this is the only media in the tray.
1. With both hands, gently lift and
pull the paper tray out of the
printer.
2. Using the green grips, adjust the
lateral and end paper retainers
according to the paper size.
3. Place the paper in the paper tray with
the printing surface facing up. Make
sure that the paper does not exceed the
limit marked on the inside of the green
grips.
PAPER
LABEL
OHP FILM
ENVELOPE