Filter
Top Products
Appendix C Control Panel Menu Functions
139
Duplex Margin
A printing start position in the horizontal direction to load paper from the
duplex print unit is adjusted. There are 5 step of –35, -30, …, 0, …, +35
in the adjustment value.(The unit of the adjustment value is 1/10mm.)
This function can be used only when a duplex print unit is attached.
The following example show how to change the Duplex Margin setting
from -10 (-1mm) to +10 (+1mm).
Tray1: A4
Ready
1. Check that “Ready” appears on the
display and the DATA light is off.
Tray1: A4
Not Ready
2. Press the ONLINE key to enter the
offline mode.
Tray1: A4
Utility Menu
3. Press the MENU key (over 2 sec-
onds) to enter the menu.
Utility Menu
Clear FC.Roll
4. Press the ENTER key to enter Util-
ity Menu.
Utility Menu
Duplex Margin
5. Using the and keys, select Tray
2 Margin.
Select Margin D
-10
6. Press the ENTER key to enter the
Duplex Margin submenu. The dis-
play shows the current setting.
Select Margin D
+10
7. Using the and keys, select mar-
gin.
Duplex Margin
New=+10 Old=-10
8. Press the ENTER key to enter the
setting into memory.
Utility Menu
Duplex Margin
9. Press the ENTER key.