Filter
Top Products
Chapter 3 Installing Printer Drivers and Utilities
27
Once the IP address, subnet mask and gateway address are set , you can
complete the installation of the printer using TCP/IP by configuring the
TCP/IP printer port for your operating system.
Gateway address
The Gateway Address submenu sets the IP address of the default gateway
for the printer. When the value is set to 0.0.0.0, no default gateway is
defined.
The following example shows how to set the printer gateway address to
192.168.31.240.
Note: Press the key to go back to the previous step.
SubNet Mask
(255)
3. Using the and keys, change the
number in parentheses to 255. Then, press
the ENTER key.
SubNet Mask
255.(255)
4. Using the and keys, change the
number in parentheses to 255. Then, press
the ENTER key.
SubNet Mask
255.255.(255)
5. Using the and keys, change the
number in parentheses to 255. Then, press
the ENTER key.
SubNet Mask
255.255.255.(0)
6. Using the and keys, change the
number in parentheses to 0. Then, press
the ENTER key.
SubNet Mask
255.255.255.0 *
7. The SubNet Mask address has now been
set.
SubNet Mask
255.255.255.0
8. Press the key to leave the Gateway
address submenu.
IP Addr
192.168.31.27
1. Press the and keys to go to the
Gateway address submenu.
Gateway Addr
0.0.0.0
2. Press the ENTER key to select the Gate-
way address submenu.