Filter
Top Products
Tally T8006e Color Laser Printers User Guide
84
Installing Memory Modules
Caution! The memory module is sensitive to static discharge. Before
removing the memory module from its protective bag, touch a grounded metal
object to discharge any static electricity that could be stored in your body.
Installation procedureAfter you install additional memory:
1. Turn off the printer.
2. Remove the power cord, and the
interface cables if they are connected.
3. Using a small Phillips-head screw-
driver, remove the two screws hold-
ing the controller board, and slide the
controller board out of the printer.
4. Place the controller board on a flat
surface.
5. Holding the memory module by the
edges, remove the memory module
from its protective bag.
6. Hold the memory module so the
metal edge faces toward the first
available memory socket and the two
notches on the metal edge are aligned
correctly with the socket.
7. Carefully insert the memory module
into the socket until it is fully seated
and the retaining clips on both sides
of the module secure it into place.