Filter
Top Products
Installation
1740A/1750A Series Waveform/Vector Monitor User Manual
1-13
Rackmounting
The 1740A/1750A--Series monitors are half-rack width and
three rack units high. They require approximately three
inches of rear clearance for power cord and cable connec-
tions, and 20 inches in front of a rack for installation and
removal of the instrument.
The optional 1700F05 rack adapter allows two Tektronix
half-rack instruments to be mounted side-by-side in a rack.
It is adjustable so that the instrument can be closely aligned
with other equipment in the rack. If only one section of the
rack adapter is used, a 1700F06 blank panel or 1700F07
utility drawer can be inserted in the unused section. Order-
ing information is given on page 1-8.