Filter
Top Products
A
Technical Notes
A-4
Phaser 340 Color Printer
Printing the startup page
By default, printing of the startup page is enabled on power up. However,
you can print the startup page anytime when you need to learn the number
of pages that have been printed, the amount of installed memory, the
number of fonts in memory, and installed interface ports.
Note
If the printer detects a non-fatal failure, it automatically prints a
startup page containing diagnostic information regardless of the
startup page setting.
There are two ways to print the startup page:
■ Use your World Wide Web browser. Refer to the PhaserShare Status
Software User Manual for more information.
■ Use the printer’s front panel menu, according to the following
instructions.
1.
While the Ready message is displayed, press the Menu button.
The printer displays the first item in the menu:
Help Pages
<---- ----> Menu
2.
Press the Menu button to access the Help Pages. The following
message appears:
Menu Map
<---- ----> Print
3.
Press the left arrow (<----) or right arrow (---->) buttons
until the following message appears:
Help Pages:Startup Page
<---- ----> Print
4.
Press the Print button to print a startup page.