Filter
Top Products
2
Getting Set Up
2-48
Phaser 340 Color Printer
Setting up an earlier version of the LaserWriter 8.x driver
1.
Make sure that the LaserWriter 8.x driver is installed on your
Macintosh.
If the LaserWriter 8.x driver is not installed:
The LaserWriter 8.x driver software is available from Apple
Computer; see your local Apple dealer for details. Refer to the
LaserWriter driver’s documentation, LaserWriter 8.x Update Guide,
for instructions on installing the driver.
2.
Follow the instructions in “Installing the printer’s software” on
page 2-30 to install the PPD printer description files. Select one of
the standard options to automatically install all of the printer’s
software, or select the PPD files for drivers and applications option.
3.
Open the Chooser.
4.
Select the LaserWriter 8 driver icon.
5.
Select your printer from the list.
6.
Still in the Chooser, click the Setup button to see a list of options.
7.
In the dialog box that appears, click the More Choices button to
see the full range of options.
Note
Do not use the Auto Setup button; errors can occur with the
PPD files. Continue with this procedure to properly set up the
driver.
8.
Click the Printer Info button, then click the Update info button in
the next dialog box.
9.
Record the information on PostScript Version and Total Memory
Installed; you will need this information later. Click
OK.
10.
Click the Select PPD button; the Printer Descriptions folder in the
Extensions folder, inside the System Folder, is displayed.