Filter
Top Products
2
Getting Set Up
2-26
Phaser 340 Color Printer
As the printer warms up
The first time you turn your printer on, it will take about 15 minutes to warm
up. The printer’s front panel displays a percentage value to indicate its
progress. The warm-up cycle is complete when the front panel displays
100%.
As the printer initializes, you will hear a series of start-up noises that are
normal and are not an indication of problems with the printer. During
warm-up, the printer outputs a cleaning page as part of its initialization.
The printer is available for printing when it displays a Ready message.
Turning off the Startup page
After the printer has warmed up, it automatically prints a startup page. If
you want to turn off the startup page, you can do so through the front panel.
Refer to “Enabling and disabling the startup page” on page A-7 for
instructions. You can also control the startup page through a utility file
provided on the drivers and utilities diskettes, or through your World Wide
Web browser. Refer to the Phaser 340 Drivers and Utilities Printing Reference or
the PhaserShare Network Cards and Software System Administrator Manual,
respectively, for information on utility files and web browsers.
9
1
0
1-1
0
1
2