Filter
Top Products
Getting Set Up
2
User Manual
2-21
Connecting the printer
Printer ports
The printer is shipped with a SCSI port and a standard parallel port. The
parallel port can be configured for bi-directional communications. The
printer can also be configured with one optional PhaserShare™ network
card. Refer to “PhaserShare network cards” on page B-6 for ordering
information.
All ports and network protocols are simultaneously active. The printer
accepts print jobs on a first-come, first-served basis.
1.
PhaserShare card (optional)
■ PhaserShare Ethernet card supports Novell NetWare, EtherTalk
and TCP/IP protocols.
■ PhaserShare Token Ring card supports Novell NetWare,
TCP/IP and TokenTalk protocols.
■ PhaserShare LocalTalk/serial card.
2.
SCSI (standard)
The SCSI port is used only for connecting an external hard disk or
for connecting the Phaser Copystation. Refer to “Adding a hard
disk for font storage” on page B-8 for more information on the
SCSI port. Refer to “Phaser Copystation” on page B-7 for more
information on the Phaser Copystation.
3.
Parallel (standard)
Note
Make all printer connections before you turn on the printer.