Filter
Top Products
2
Getting Set Up
2-24
Phaser 340 Color Printer
Parallel connection
The printer supports a standard (uni-directional) parallel port. The parallel
port can also be set for bi-directional communications using utility files or
your World Wide Web browser. Refer to the Phaser 340 Drivers and Utilities
Printing Reference or the PhaserShare Network Cards and Software System
Administrator Manual, respectively, for information on changing parallel
communications. The printer uses a 36-pin high-density to 25-pin DSUB
plug parallel cable. Refer to “Interface cables and adapters” on page 5-3 for
information on ordering a parallel interface cable.
Note
The printer’s parallel port uses a high density connector,
Type IEEE 1284-C. To use a standard Centronics-style parallel
cable, use the parallel cable adapter included with the printer.
1.
Connect a parallel interface cable to your computer and to the
printer’s parallel port.
2.
If you have no other connections to make, turn immediately to
“Turning on the printer” on page 2-25.
115
Parallel
Service
Only
Second
Feeder
PHASER 340
SCSI Disk
Ethernet®
1
Service
2
Reset
9101-08
Parallel
1