Filter
Top Products
3
Printing
3-8
Phaser 340 Color Printer
Selecting print features
The printer provides TekColor color corrections that you can select to
customize the look of your prints. In addition to the 300 dpi print-quality
mode, the Phaser 340 with extended features provides a user selectable
600 x 300 dpi print quality mode. There are several ways to select print
features:
■
Through a printer driver.
Print selections made using a supported
printer driver override the settings on the printer’s front panel.
Refer to the Phaser 340 Drivers and Utilities Printing Reference for
information on using printer drivers.
■
From the printer’s front panel.
Settings you make on the front panel are
only used when printing from a non-supported driver. Refer to the
instructions included in this chapter.
■
By sending a PostScript utility file to the printer.
Printer settings
downloaded to the printer’s front panel are only used when
printing from a non-supported driver. Refer to the Phaser 340
Drivers and Utilities Printing Reference for information on sending
utility files to the printer.
■
From your World Wide Web browser.
Refer to the PhaserShare Status
Software User Manual for more information.
Print quality modes
The Phaser 340 provides a 300 dpi resolution print quality mode.
600 x 300 dpi resolution is optionally available.
300 dpi
The default print-quality setting. This is the fastest mode for full
color printing on paper and transparencies. In this mode, the printer
operates at 4 ppm (pages-per-minute) for paper and 2 ppm for
transparencies.
600 x 300 dpi
Available with the Phaser 340 extended features option. The
extended features also include 24 Mbytes of memory and a total of 69 fonts.
600 x 300 dpi resolution produces better looking text and the smoothest
color blends on paper. In this mode, the printer operates at 2 ppm. This
print mode is not available for transparency printing.