Filter
Top Products
3 Tests and Diagnostics 3.31 SETUP
Satellite A50S/TECRA A3X Maintenance Manual (960-534) [CONFIDENTIAL] 3-99
CD-ROM→LAN→FDD→HDD: The computer looks for bootable files in
the following order: CD-ROM, LAN,
FDD and HDD.
HDD→FDD→CD-ROM→LAN: The computer looks for bootable files in
the following order: HDD, FDD, CD-
ROM and LAN. (Default)
(*1) CD-ROM refers to a Optical Disk Drive.
(b) HDD Priority
Use this option to set the booting priority from HDD.
Built in HDD→USB (Default)
: detecting boot-command from Built in HDD
USB →Built in HDD
: detecting boot-command from USB memory
(c) Network Boot Protocol
Use this option to set the starting method via a network.
PXE Sets to PXE protocol. (Default)
RPL Sets to RPL protocol.
7. Display
This group of options configures the computer’s display.
(a) Power On Display
This option is used to select the display when booting up.
Auto-Selected Selects an external monitor if one is connected.
Otherwise it selects the internal LCD. (Default)
LCD+AnalogRGB Selects both the internal LCD and the external CRT for
simultaneous display.
NOTE: When starting the computer in Standby or Hibernation, the last configuration is
remembered. If data does not appear on the display you are using after starting
in Standby or Hibernation, pressing Fn+F5.
Pressing Fn+F5 changes the display setting as follows in order: the internal
LCD, the external display, both the internal LCD and the external display.
When an external display, which does not support SVGA mode is connected and
“LCD+AnalogRGB”
is selected, the external display is not displayed.
(b) LCD Display Stretch