Filter
Top Products
3 Tests and Diagnostics 3.31 SETUP
Available Enable the Execute-Disable Bit function.
Not Available Disable the Execute-Disable Bit function.
(c) Auto Power On
This option displays setting for Auto Power On.
Disabled Indicates auto power on is not set.
Enabled Indicates auto power on is set.
When “Enabled” is selected, the following sub-window appears.
Set the parameters for the Auto Power On (automatic power on) function in
the “OPTIONS” window. To set the time, use Space or BackSpace. Press
↓ to move the cursor to the right and ↑ to move the cursor to the left when
you set the date and time.
For the Alarm Time, set the time to turn on the power automatically. The
“second” cannot be set. When it is set to “Disabled”, the time to turn on
automatically is not set.
For the Alarm Date Option, set the date to turn on the power automatically.
When it is set to “Disabled”, the time to turn on automatically is not set.
Alarm Time = 00:00:00
Alarm Date Option = Disabled
OPTIONS
NOTE: 1. Do not remove the AC adaptor and battery pack at the same time when you
use this feature. If you do so, data saved by the resume function will be lost.
You must also reset this option.
2. If you have set a password and the computer boots by the Auto Power On
function and Standby is on, the computer will start with the instant security
function enabled. The password = message is not displayed; however, you
must enter the password to use the computer.
3. This option is enabled only once, the setting is reset, after booting up.
(d) Diagnostic Mode
This option enables/disables the HW Diagnostic test function.
Disabled Disables the HW Diagnostic test function. (Default)
Enabled Enables the HW Diagnostic test function.
(e) Language During Bootup
Satellite A50S/TECRA A3X Maintenance Manual (960-534) [CONFIDENTIAL] 3-101