Filter
Top Products
Replacement Procedures 4.23 Fluorescent Lamp
4
4.23.3 Replacing the 15.0 Inch XGA LG.Philips Fluorescent lamp
CAUTION: When replacing the fluorescent lamp, wear finger covers or gloves to avoid
contaminating or damaging the LCD panel. Be careful not to let dust or
other foreign substance into the module.
Disassembling the 15.0 Inch XGA LG.Philips Fluorescent lamp
To disassemble the 15.0-inch XGA LG.Philips fluorescent lamp, follow the steps below and
refer to Figures 4-85 to 4-88.
1. Remove the outside tape and cover shield.
1) Remove the adhesive tape fixing the B/L wire and Top case. Be careful not to
apply to the B/L wire.
2) Remove the cover shield (G). Be careful not to apply excessive force to the
gate COF and source PCB.
CUATION: Wear anti-static gloves to prevent circuit damage caused by ESC.
Cover shield
Cover shield
Adhesive tape
Adhesive tape
Adhesive tape
Figure 4-85 Replacing 15.0 Inch LG.Philips fluorescent lamp (XGA) (1)
4-98 [CONFIDENTIAL] Satellite A50S/TECRA A3X Maintenance Manual (960-534)