Filter
Top Products
2 Troubleshooting Procedures 2.14 SD Card Slot Troubleshooting
2.14 SD Card Slot Troubleshooting
To check if the SD card slot is good or not, follow the troubleshooting procedures below as
instructed.
Procedure 1: Check on Windows
Procedure 2: Connector/Replacement Check
Procedure 1 Check on Windows
Insert a SD card into the slot. Check if Windows recognizes automatically the SD card and
the data in the SD card can be read.
If the card is not recognized or data are not read, go to Procedure 2.
Procedure 2 Connector/Replacement Check
The SD card is connected to the connector PJ2130 on the system board.
Check 1 The SD card and the system board may be disconnected. Make sure the SD card is
firmly inserted to PJ2130 on the system board. If not, insert it firmly. If the SD
card is still not functioning properly, perform Check 2.
Check 2 The SD card may be faulty. Replace it with a new one following the step in
Chapter 4. If the problem continues, perform Check 3.
Check 3 The system board may be faulty. Replace it with a new one following the step in
Chapter 4.
2-60 Satellite A40 Maintenance Manual (960-458)