Filter
Top Products
3.23 SETUP 3 Tests and Diagnostics
10. Drives I/O
This option displays the address and interrupt level for the hard disk drive, CD/DVD-
ROM drive and PC card. It is for information only and cannot be changed.
Built-in HDD The setting for the built-in HDD is displayed.
CD-ROM The setting for the built-in CD-ROM is displayed.
PC Card This is displayed, when a PC card type HDD that can boot system is
inserted to PC card slot.
11. PCI Bus
This option displays the interrupt level for the Card Bus in the computer. It is for
information only and cannot be changed.
PCI BUS = IRQ10, IRQ11
12. PC Card
This option displays the PC Card Controller mode.
Auto-Selected Use this setting for all PC Card if you are using Windows
98/2000/XP which support Plug&Play. (Default)
CardBus/16-bit If you are using Windows for Workgroups or Windows NT
4 or lower or if the card does not work properly with the
Auto-Selected setting, use this setting for Card Bus PC
card.
PCIC Compatible
If you are using Windows for Workgroups or Windows NT
4 or lower or if the card does not work properly with the
Auto-Selected and CardBus/16 bit setting.
13. Peripheral
Use this option to select the peripheral's mode.
(a) Internal Pointing Device
This option enables or disables the touch pad
Enabled Enables the touch pad. (Default)
Disabled Disables the touch pad.
Satellite A40 Maintenance Manual (960-458) 3-65