Filter
Top Products
4 Replacement Procedures 4.10 Wireless LAN board/Modem Daughter Card
4.10 Wireless LAN board/Modem Daughter Card
4.10.1 Wireless LAN board
CAUTION: The power must be turned off when you remove the wireless LAN board.
Removing the wireless LAN board with the power on risks damaging the
board or the computer itself.
Never press hard or bend the wireless LAN board.
Removing the wireless LAN board
To remove the wireless LAN board, follow the steps below and refer to figure 4-15 and 4-16.
1. Remove the screw fixing the wireless LAN board cover.
• M2×4Z BIND screw ×1
or
• M2×4 LH STICK screw ×1 (Athelos a/b/g)
2. Slide the wireless LAN board cover to the left and lift it up to remove.
M2
×
4Z BIND or M2
×
4 LH STICK
Wireless LAN board cover
Figure 4-15 Removing the wireless LAN board cover
4-28 Satellite A40 Maintenance Manual (960-458)