Filter
Top Products
3.25 Wireless LAN Test Program (Agere) 3 Tests and Diagnostics
3.25 Wireless LAN Test Program (Agere)
This section describes how to perform the Agere wireless LAN transmitting-receiving test
with the test program.
NOTE: Use another computer (with Agere wireless LAN card) that can communicate
by the wireless LAN as a reference machine to perform this test.
To start the Wireless LAN test program, follow the steps below:
NOTE: 1) Before starting the wireless LAN test, make sure the Wireless
Communication Switch on the left side of the computer is turned on. (The
Wireless Communication LED lights orange.)
2) Release the write-protection of the floppy disk for the test.
Turn off the computer and connect a USB FDD to the computer. Insert a floppy disk
containing the test program into the floppy disk drive of the target machine and turn on the
target machine while pressing U. The Wireless LAN test menu will appear.
##############################################################
#### Wireless LAN sub system repair test VX.XX ####
##############################################################
* *
* 1 Transmit & Receive test [Responder] *
* 2 MAC Address test [Mini-PCI Wireless LAN] *
* 3 Wireless LAN (WEP64/128) test *
* *
* 0 Transmit & Receive test [Initiator] *
* *
**************************************************************
....Press test number [1-3,0] ?
Press 1, 2 or 3, and the Enter to perform the corresponding sub test. To quit the Wireless
LAN test program, eject the floppy disk and turn the computer off while the menu above is
displayed.
Satellite A40 Maintenance Manual (960-458) 3-69