Filter
Top Products
4 Replacement Procedures 4.26 Fluorescent lamp
8. Install the bezel (E) on the lamp cover and hook the four latches on the lamp cover
and two latches on the P-chassis.
(E) Bezel
(2) Lean the bezel on the lamp cover
without interference with the TCP.
(1) Hitch the hook of the bezel
on the rib of the P-chassis.
< Side view >
Hook
(Lamp cover side)
Figure 4-117 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (20)
Make sure of mating of the bezel and the rib of the P-chassis.
Make sure of mating of the bezel and the latch o
f
the P-chassis.
Make sure of mating of the bezel
and the latch of the P-chassis.
Figure 4-118 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (21)
4-124 Satellite A40 Maintenance Manual (960-458)