Filter
Top Products
4 Replacement Procedures 4.17 Sound board/MIC harness
4.17 Sound board/MIC harness
Removing the Sound board/MIC harness
To remove the sound board/MIC harness, follow the steps below and refer to Figure 4-22 and
Figure 4-23.
1. Remove the following screw securing the sound board.
• M2×4C BIND ×1
2. Disconnect the sound board FPC and speaker harness from the connector CN9510
and CN6350 on the sound board and remove the sound board from the slot.
Speaker harness
Sound board FPC
Sound board
M2x4C BIND
CN6350
CN9510
Figure 4-22 Removing the sound board/MIC harness (1)
4-42 [CONFIDENTIAL] PORTÉGÉ A600 Maintenance Manual (960-710)