Vanguard Managed Solutions 6455 Network Card User Manual


 
4-2 Powering Up Your Vanguard 6435/6455
Power Up Procedure
Power Up Procedure
Introduction This section explains how to power up the Vanguard 6435/6455.
Procedure Follow these steps to power up your Vanguard 6435/6455.
To power down the Vanguard 6435/6455, simply set the power switch to Off.
Step Action
1 Check that all the cards are fully inserted and secure.
2 Make sure that the AC power cord is plugged in.
3 Set the power switch to On.
4 Check that the fan is operating.
5 Check that the front panel LCD displays the proper messages as
described in the next section.