Vanguard Managed Solutions 6455 Network Card User Manual


 
2-8 Hardware Description
Motherboard
DIM DIP Switches Depending on the type of DIM on the motherboard, the DIP switches can have either
of two settings as shown in Figure 2-7. These switches are set at the factory. If you
need to change the DIP switch settings, refer to “DIMs, SIMMs, DIMMs and
Switches” section in Chapter 3.
Figure 2-7. Settings for DIM DIP Switches
This table details the DIM DIP switch settings:
Test Mode Switch Figure 2-8 shows the Test Mode switch and this table explains the function of each
switch setting.
Figure 2-8. Test Mode Switch
Switch Settings
for V.11, V.35, V.36, DSU for V.24
Switch Settings
Switch Number V.11, V.35, V.36, DSU V.24
1Off On
2Off On
3Off On
4Off On
5Off On
6On Off
7On Off
8On Off
P2
RI
P1
Not
Used
Reserved
Default CTP
MB
RI
MB