Vanguard Managed Solutions 6455 Network Card User Manual


 
About the Vanguard 6435/6455 1-15
Vanguard 6455 Requirements for Bisync
Vanguard 6455 Requirements for Bisync
Vanguard 6455
Requirements
The guidelines below are required when using the BSC 3270-to-SNA Conversion
feature:
32 Meg SIMM Memory Module
Local Dynamic Port Creation Heap Size needs to be configured for Bisync
and AS/400
Note
When setting the Local Dynamic Port Creation Heap Size, refer to the Ease of
Configuration information located in the following section. A copy of your
current configuration files should be saved before changing the Local Dynamic
Port Create Heap Size.
BSC 3270-to-SNA
Conversion
Increase
Parameters to
Maximum Value
The following Node Record Parameters need to be increased in order to
accommodate increasing the number of SNA to Bisync 3270 Devices to 256:
Mnemonic Table Size
Quantity of DSP Devices
Maximum Simultaneous Calls
The Frame Relay Station or X.25 Port parameter; Number of Two Way
Simultaneous Calls, needs to be increased in order to accommodate increasing the
number of SNA to Bisync 3270 Devices to 256. Maximum number of SLAC
Stations supported for BSC/LU Devices on a Vanguard 6455 is 20.
BSC 2780/3780-to-
SNA/LU0
Conversion
Increase
Parameters to
Maximum Value
The following Node Record Parameters need to be increased in order to
accommodate increasing the number of SNA 3780 remote ports to 256:
Mnemonic Table Size
Quantity of SES 3780 remote ports
Maximum Simultaneous Calls
The Frame Relay Station or X.25 Port parameter; Number of Two Way
Simultaneous Calls, needs to be increased in order to accommodate increasing the
number of 3780 conversion stations to 256.