Vanguard Managed Solutions 6455 Network Card User Manual


 
About the Vanguard 6435/6455 1-17
Vanguard 6455 Requirements for Bisync
Configuring the
Parameters
This table explains how to configure the two parameters:
After you complete this procedure, review the alarm log for disabled ports. If
necessary, reduce the resource requirements allocated to the other ports and stations
and repeat the above procedure.
Step Action
1 From the Main menu, select Configure.
2 From the Configure menu, select Node.
3 Press ENTER until the parameter *SHARED Dynamic Port
Creation Heap Size appears. Enter the maximum value (16000000).
4 Press ENTER again. The parameter *LOCAL Dynamic Port
Creation Heap Size appears. Type the maximum value (16000000).
5 Press ; (semi-colon) and then press ENTER.
6 Perform a Node Boot (Warm).
The node reboots and the Ease of Configuration function is enabled.