Filter
Top Products
030-300536 Rev. A 133 August 2007
User GuideVersaLink Wireless Gatewa
y
(
Model 7500
)
If you want to PING using the System Self Test screen (diagnostics page) shown above, enter your DNS or IP
address in the fields provided and click on the test button. The System Self Test will run a diagnostic test that
executes independent of firewall security settings. See the following table for test descriptions and possible
responses.
If you want to PING using the MS-DOS (shell) window, first you will need to check your firewall security setting.
(If you PING via DOS shell you are susceptible to firewall rules, as this PING is dependent on VersaLink's firewall
settings.) If your firewall is set to Medium or High, you will not be able to PING. You must set your firewall
security setting to Low or None.
Diagnostics
DSL VersaLink checks the status of the DSL connection.
Possible Responses:
Connection Up: VersaLink is operating correctly and has obtained synchronization with the
opposing network device.
Connection down: VersaLink is operating correctly, but has not synchronized with the opposing
device.
PPPoE Indicates that a PPPoE session is or is not established.
Possible Responses:
Session Up: A valid PPPoE session has been detected.
No Session: Currently there is no active PPPoE session established.
Initiating Session: A PPP session must be connected from the home page.