Verizon 7500 Network Card User Manual


 
030-300536 Rev. A 153 August 2007
User GuideVersaLink Wireless Gatewa
y
(
Model 7500
)
16.14 Universal Plug and Play
In the Advanced screen, click Universal Plug and Play. This feature advertises the presence of your Router on the
LAN.
To enable UPnP in your Router, do the following:
1. Click the UPNP Enable box (a check mark will appear in the box).
2. Click Apply to allow the change to take effect.
3. Click OK in the pop-up screen to reset the Router.
NOTE: By factory default UPnP is disabled. If you have previously enabled UPNP and now want to disable it, click
the UPnP Enable box to remove the check mark, and then click Apply.