Filter
Top Products
030-300536 Rev. A 90 August 2007
User GuideVersaLink Wireless Gatewa
y
(
Model 7500
)
14.2.3.1 Enabling Private LAN—Disabling Ethernet WAN Uplink
If you selected Private LAN in the VersaPort screen, this will enable the Router’s DSL transceiver, and the Router
will use its DSL port as the WAN interface. This configuration will disable the WAN Uplink port (UPLINK/E1 on
the rear of the Router).
• When Private LAN is selected, the DSL port on the rear of the Router is enabled and is the WAN interface
to the Internet.
• When Ethernet WAN Uplink is selected, the UPLINK/E1 port on the rear of the Router is enabled and is
the WAN uplink to another ADSL device through which you will make your Internet connection.
Remember, you must click Apply to allow the settings to take effect in the Router.
NOTE:
1. When using the optional UPLINK/E1 port, Ethernet LAN connection is limited to E2, E3, and E4.
The WAN Uplink feature is optional and, if it is disabled, the Router will use DSL only as the WAN interface.
2. Some menu options are unavailable when the Router is configured for WAN Uplink port. However, all of the
Router’s menu options are displayed when the Router is configured for LAN Ethernet port.
3. The Router’s factory default setting is Private LAN.
4. If WAN Uplink is not enabled in the .ini file, the Router will use DSL only as the WAN interface.