Filter
Top Products
STATus Subsystem
VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual
3–79
STATus:QUEStionable:POWer:ENABle
STATus:QUEStionable:POWer:ENABle?
Sets or queries the contents of the Power Enable register. Setting unused enable
bits does not generate an error; the bits are ignored.
If the power-on status clear flag is FALSE (see *PSC command on page 3–166)
at power on, the register value will be restored from nonvolatile RAM; otherwise
the register value at power on is set to #H7FFF. Executing the STATus:PRESet
command sets the register value to #H7FFF.
STATus:QUEStionable:POWer:ENABle <Mask>
STATus:QUEStionable:POWer:ENABle?
<Mask> Query response
<NRf> | <Nondecimal Numeric>
0 ≤ N ≤ #HFFFF
<NR1>
Not Applicable
–222, “Data Out of Range”
You attempted to set the enable register to an illegal value.
None
Command: STAT:QUES:POW:ENAB #H3FFF
Query: STAT:QUES:POW:ENAB?
Response: 512
STATus:QUEStionable:POWer?
STATus:QUEStionable:POWer:CONDition?
STATus:PRESet
Syntax
Parameters
Reset Value
Errors and Events
Dependencies
Examples
Related Commands