VXI VX1410A Computer Hardware User Manual


 
STATus Subsystem
VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual
3–41
STATus:OPERation:VXIInterrupt:ENABle
STATus:OPERation:VXIInterrupt:ENABle?
Sets or queries the contents of the VXI Interrupt Monitor Enable register. Setting
unused enable bits does not generate an error; the bits are ignored.
If the power-on status clear flag is FALSE (see *PSC command on page 3–166)
at power on, the register value will be restored from nonvolatile RAM; otherwise
the register value at power on is set to #H7FFF. Executing the STATus:PRESet
command sets the register value to #H7FFF.
STATus:OPERation:VXIInterrupt:ENABle <Mask>
STATus:OPERation:VXIInterrupt:ENABle?
<Mask> Query response
<NRf> | <Nondecimal Numeric>
0 N #HFFFF
<NR1>
Not Applicable
–222, “Data Out of Range”
You attempted to set the enable register to an illegal value.
None
Command: STAT:OPER:VXII:ENAB #H0001
Query: STAT:OPER:VXII:ENAB?
Response: 1
STATus:OPERation:VXIInterrupt?
STATus:OPERation:VXIInterrupt:CONDition?
STATus:PRESet
Syntax
Parameters
Reset Value
Errors and Events
Dependencies
Examples
Related Commands