Filter
Top Products
Getting Started
VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual
1–13
H T-20 Torx driver
H #2 Phillips screwdriver
Refer to Figure 1–6 and perform the following steps to install the rackmount kit
hardware:
1. Determine where you want the mainframe positioned in the rack (recessed
inside the rack or protruding in front of the rack).
If you want the mainframe installed protruding in front of the rack, position
the rackmount bracket as shown on the right side of Figure 1–6. If you want
to recess the mainframe in the rack, position the rackmount bracket as shown
on the left side of Figure 1–6.
2. Determine how far you want to recess or extend the IntelliFrame Mainframe
and install the rackmount adapter as shown using two 8-32 screws (included
with the kit). Repeat this step for the other bracket.
NOTE. To comply with VXIplug&play mounting specifications, position the
rackmount adapter at the mounting holes with the adjacent identifier keys (see
Figure 1–6). This results in 3.960 in (10.06 cm) from the module panel mounting
surface to the rack frame mounting surface.
Install the Rackmount
Kit Hardware