Filter
Top Products
Command Groups
VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual
3–17
Table 3–9: System commands (Cont.)
Header Description
:BAUD[?] Sets or queries the baud rate of the RS-232 port.
:BITS[?] Sets or queries the number of bits per character in the
RS-232 port.
:CONTrol
:RTS[?] Sets or queries the operation of the RTS and CTS lines.
:ECHO[?] Sets or queries whether incoming characters are echoed
back to the RS-232 port.
:ERESponse[?] Sets or queries whether error messages are automatically
returned to the RS-232 port.
:LBUFfer[?] Sets or queries the state of the character buffer.
:PACE[?] Sets or queries whether software flow control (XON/XOFF)
is enabled.
:PARity[?] Sets or queries the type of parity for the RS-232 port.
:PRESet
[:ALL] Configures RS-232 port parameters to default values.
:RAW Configures the RS-232 port parameters for use with a
computer.
:TERMinal Configures the RS-232 port parameters for use with a
terminal.
:SBITs[?] Sets or queries the number of stop bits sent with each
character.
:DATE[?] Sets or queries the calendar date.
:LMAintenance? Returns the last factory maintenance date.
:ERRor? Returns the next entry from the Error/Event queue.
:ALL? Returns a comma separated list of all events stored in the
Error/Event queue.
:CODE? Returns the next event code stored in the Error/Event
queue.
:ALL? Returns a comma separated list of all event codes stored in
Error/Event queue.
:COUNt? Returns the number of unread events in the Error/Event
queue.
:ENABle[?] Sets or queries enable events to be placed in the
Error/Event queue.
:ALL? Presets the Error/Event queue enable to –1999:1000.
:FACTory Sets the IntelliFrame Mainframe settings to the factory
default values.