Filter
Top Products
Maintenance
VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual
8–15
The nut rails at the top and the bottom of the front of the IntelliFrame Mainframe
allow the user to secure installed modules into the mainframe by screwing the
top and bottom of the modules to the front of the mainframe. Refer to Figure
8–11 to remove these nut rails, and perform Procedure 1 on page 8–5 to remove
the mainframe cover.
1. Loosen all module retaining screws (it may be necessary to slide the modules
partially out of the mainframe).
2. Slide the nut rail out of hole on the side of mainframe.
Replace the nut rail by sliding it back in the side of the mainframe and pushing it
into place.
Top nut rail
Remove module
retaining screws.
Bottom nut rail
Figure 8–11: Replacing the top and bottom nut rails
Procedure 6: Replacing
the Top and Bottom Nut
Rails