Filter
Top Products
Command Groups
3–14
VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual
Table 3–8: Status commands (Cont.)
Header Description
:VXIInterrrupt? Returns the contents of the VXIInterrupt event register.
:Condition? Returns the contents of the VXIInterrrupt Condition
register.
:INTerrupt Returns the time when each interrupt occurred.
:ENABle[?] Sets or queries the contents of the VXIInterrupt enable
register.
:VXIMonitor? Returns the contents of the VXI Monitor Event register.
:ACFail? Returns the time when the ACFAIL signal was asserted.
:BERR? Queries the VXI Bus Error address space.
:ENABle[?] Sets or queries the contents of the VXI Monitor Enable
register.
:SYSFail? Returns the time when the VXI SYSFAIL signal was
asserted.
:VXITrigger? Returns the contents of the VXITrigger Event register.
:CONDition? Returns the contents of the VXITrigger Condition
register.
:TRIGger? Returns the trigger location.
:ENABle[?] Sets or Queries the Contents of the VXITrigger enable
register.
:PRESet Presets the SCPI enable registers, transition filters, and
the Error/Event queue enable.
:QUEStionable? Returns the contents of the Questionable Register as a
decimal number.
:BLOWer? Returns the contents of the Blower Event register.
:CONDition? Returns the contents of the Blower Condition register.
:CURRent? Returns the contents of the Current Event register.
:CMAXimum? Returns the maximum current level since power on.
:CONDition? Returns the contents of the Current Condition register.
:ENABle[?] Sets or queries the contents of the current enable
register.
:LEVel? Returns current level.
:LIMit[?] Sets or queries the maximum current usage allowed
before generating an alarm.
:MAXimum? Returns the maximum current level since the last factory
maintenance.
:ENABle[?] Sets or queries the contents of the Blower Enable
register.