Filter
Top Products
Status and Events
VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual
3–181
Table 3–20: IntelliFrame Mainframe error and event codes
Code Message
0 No error. The error queue is empty. Every error or event has been read or
was purposely cleared.
–100 Command error.
–101 Invalid character.
–102 Syntax error.
–103 Invalid separator.
–104 Data type error.
–108 Parameter not allowed. More parameters than expected were received for
the header.
–109 Missing parameter.
–110 Command header error.
–112 Program mnemonic too long.
–113 Unidentified header.
–120 Numeric data error.
–141 Invalid character data.
–144 Character data too long.
–160 Block data error.
–161 Invalid block data.
–200 Execution Error.
–203 Command protected.
–213 Init Ignored. The measurement initiation was ignored because another
measurement was already in progress.
–220 Parameter error. A program data element related error occurred.
–221 Settings conflict. A legal program data element was parsed but could not be
executed due to the current state of the mainframe.
–222 Data out of range. The value of the data was outside of the legal range.
–223 Too much data.
–224 Illegal parameter value. The parameter value must be one of the exact
values from the command list.
–315 Configuration memory Lost. Some instrument setting may be lost.
–350 Queue Overflow. An error occurred but there was no room in the queue to
record the error.
–380 Calibration failed.
–381 Execution queue overflow. Internal error.
–410 Query INTERRUPTED.