VXI VX1410A Computer Hardware User Manual


 
SYSTem Subsystem
3–116
VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual
SYSTem:COMMunicate:SERial:ERESponse
SYSTem:COMMunicate:SERial:ERESponse?
Sets or queries if error response messages automatically return to the RS-232 port.
When the mode is ON, all error and event response messages will output directly to
the RS-232 port; the error and event response messages will not be placed in the
Error/Event queue. When the mode is OFF, all error and event messages will be
reported to the Error/Event queue and will not be output to the RS-232 port directly.
If the mode is ON, all asynchronous error messages are placed in the Error/Event
queue. The event registers will not be updated by any event message.
Asynchronous event messages include “Self Test Failed” and “Configuration
Memory Lost.”
SYSTem:COMMunicate:SERial:ERESponse <Boolean>
SYSTem:COMMunicate:SERial:ERESponse?
<Boolean> Query response
<NRf>
N 0
0
ON
OFF
<NR1>
1
0
1
0
Not Applicable
–224, “Illegal Parameter Value”
You attempted to set use an illegal parameter value.
None
Command: SYST:COMM:SER:ERES OFF
Query: SYST:COMM:SER:ERES?
Response: 0
All SYSTem:COMMunicate:SERial commands
Syntax
Parameters
Reset Value
Errors and Events
Dependencies
Examples
Related Commands