Filter
Top Products
VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual
3–111
SYSTem Subsystem
This section describes each command and query in the SYSTem subsystem. The
SYSTem subsystem controls the parameters shown in Figure 3–8. The SYSTem
subsystem collects the functions that are not related to the performance of the
IntelliFrame Mainframe.
SYSTem
COMMunicate DATE? HELP SYSReset TIME
SERial
ERRor? NVSave
VERSion?
NVRecall
IEMessage
FACTory
POWer
MODel?
OPTIons?
Figure 3–8: SYSTem subsystem hierarchy
Table 3–14 lists the factory default settings for the SYSTem:COMMunicate:Seri-
al parameters in the IntelliFrame Mainframe. These default settings do not
change when you issue the SYSTem:FACTory command.
Table 3–14: Default factory RS-232 communication settings
Command Factory default setting
SYSTem:COMMunicate:SERial[:RECeive]:BAUD 9600
SYSTem:COMMunicate:SERial[:RECeive]:BITS 8
SYSTem:COMMunicate:SERial:CONTrol:RTS ON
SYSTem:COMMunicate:SERial:ECHO 1
SYSTem:COMMunicate:SERial:ERESponse 1
SYSTem:COMMunicate:SERial:LBUFfer 1
SYSTem:COMMunicate:SERial[:RECeive]:PACE XON
SYSTem:COMMunicate:SERial[:RECeive]:PARity[:TYPE] NONE
SYSTem:COMMunicate:SERial[:RECeive]:SBITs 1