Filter
Top Products
Command Groups
3–18
VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual
Table 3–9: System commands (Cont.)
Header Description
:HELP
:SYNTax? Returns the syntax of the specified command.
:IEMessage Sends interface event messages between the VXI interface
and the RS-232 port.
:MODel? Returns the model number of the mainframe.
:NVRecall Recalls device settings from nonvolatile RAM.
:NVSave Saves device settings to nonvolatile RAM.
:OPTions Returns the options installed in the mainframe.
:PASSword
:CDISable
1
Disables the CALibrate command.
:CENable
1
Enables the CALibrate command.
:STATe?
1
Queries if password-protected commands are enabled.
:POWer[?] Powers the mainframe on or off. The query returns whether
the power is on or off.
:CYCLe? Queries the number of times the mainframe power has been
cycled.
:SOURce? Queries the power source of the enhanced monitor.
:SYSReset[?] Sets or queries whether the VXI SYSRESET signal can
reset the enhanced monitor.
:IMMediate Initiates a VXI SYSRESET signal.
:TIME[?] Sets or queries the time.
:LMAintenance? Returns the number of hours the mainframe has been
operating since the last factory maintenance.
:ON? Returns the number of hours the mainframe has been
operating since power on.
:VERSion? Returns the SCPI version supported by the IntelliFrame
Mainframe.
1
These commands are intend to be used only by qualified service personnel while
servicing the instrument.