WHP Wireless DL360 Server User Manual


 
Server Software and Configuration Utilities 71
For more information about array controller configuration, refer to the controller
user guide, or the HP ROM-Based Setup Utility User Guide on the
Documentation CD or the HP website
(http://www.compaq.com/support/techpubs/whitepapers
).
HP ProLiant Essentials RDP
The HP ProLiant Essentials RDP software is the preferred method for rapid,
high-volume server deployments. The RDP software integrates two powerful
products: Altiris Deployment Solution and the HP ProLiant Integration Module.
The intuitive graphical user interface of the Altiris Deployment Solution
console's graphical interface provides simplified point-and-click and drag-and
drop operations that enable you to deploy target servers remotely, perform
imaging or scripting functions, and maintain software images.
For more information about the HP ProLiant Essentials RDP, refer to the HP
ProLiant Essentials Rapid Deployment Pack CD or refer to the HP website
(http://www.hp.com/servers/rdp
).
Re-Entering the Server Serial Number and Product ID
After you replace the system board, you must re-enter the server serial number
and the product ID.
1. During the server startup sequence, press the F9 key to access RBSU.
2. Select the System Options menu.
3. Select Serial Number. The following warning is displayed:
WARNING! WARNING! WARNING! The serial number is loaded
into the system during the manufacturing process and
should NOT be modified. This option should only be used
by qualified service personnel. This value should always
match the serial number sticker located on the chassis.
4. Press the Enter key to clear the warning.
5. Enter the serial number and press the Enter key.
6. Select Product ID.