Filter
Top Products
Xerox 4112/4127 Copier/Printer User Guide
8-2
8. Paper and other Media
Additional information
• For a description of how to make copies on non-standard size
paper, information about setting Paper Type, Paper Type
Priority, Paper Tray Priority, paper quality, and setting the
paper substitute feature refer to. “Paper Tray Settings” in the
System Administration Guide.
• The machine automatically detects the size and orientation of
loaded paper in trays. The paper type, however, must be set.
For details about changing paper type, refer to "Paper Tray
Attributes" in the System Administration Guide.
Loading Paper into Trays
When a paper tray runs out of paper during copying or printing, a
message is displayed on the Control Panel. Add paper to the tray
according to the displayed instructions. Copying or printing is
automatically resumed after paper is added to the tray.
When loading paper into trays:
• Do not load paper exceeding the maximum fill line. Doing so
may cause paper jams and other printer problems.
• Place the paper in the tray with the side to be copied or printed
on facing up. Tab paper instructions may differ.
This section presents the following paper and media usage
information:
•‘
Loading Paper into Trays 1 and 2” on page 8-3
•‘
Loading Paper into Trays 3 and 4” on page 8-4
•‘
Loading Paper into Tray 5 (Bypass)” on page 8-6
•‘
Loading Paper into Trays 6 and 7 (optional High Capacity
Feeder)” on page 8-7
•‘
Loading Paper into Tray 6 (optional Oversized High
Capacity Feeder)” on page 8-9
•‘
Loading paper into Tray 8 (Post-Process Inserter)” on
page 8-11