Filter
Top Products
Xerox 4112/4127 Copier/Printer User Guide
12-42
12. Problem Solving
116-713 Cause Job was divided and printed due to insufficient disk
space.
Remedy Remove unnecessary data from the hard disk to
increase free disk space.
116-714 Cause An HP-GL/2 command error occurred.
Remedy Check the print data.
116-720 Cause An error occurred during printing as there was
insufficient memory.
Remedy Stop unnecessary ports and remove unnecessary data
from the hard disk to increase free disk space.
116-740 Cause Numerical value operation error occurred as a value
exceeding the value limit of the printer was used in the
print data.
Remedy Check the print data.
116-747 Cause There are too many paper margin values for the
HP-GL/2 effective coordinate area.
Remedy Reduce the paper margin values, and instruct it to print
again.
116-748 Cause There is no plot data in the HP-GL/2 print data.
Remedy Check the print data.
116-749 Cause Job cancelled because the specified font was
unavailable.
Remedy Install the font or set up a font replacement on the print
driver side.
116-771
116-772
116-773
116-774
116-775
116-776
116-777
116-778
116-790
Cause There was a problem with parameters in the JBIG data.
They were automatically edited.
Remedy If any problem occurs in job result, try to process the job
again.
116-780 Cause There is a problem with the document attached to the
received mail.
Remedy Check the attached document.
123-400 Cause A malfunction occurred in the machine.
Remedy Power-cycle the machine. If the machine error is not
fixed by performing the relevant remedy, contact the
Customer Support Center.
127-210 Cause Communication error between the printer and the
controller. Error detected by the printer.
Remedy Remove and reinsert the cable connection between the
printer and the controller. Power off and on both the
printer and the controller. If the problem persists, call the
Customer Support Center.
Error Code
Category
Cause and Remedy
CPSMO