Xerox 4112/4127 Copier/Printer User Guide
2-25
2. Copy
Binding Edge Erase
The binding-edge erase feature on the Book Copying screen,
erases the shadow from the center section of a bound document.
You can set the width for Binding Edge Erase in the range from 0
to 1.9 inches (0 to 50 mm) in 0.1 inch or 1 mm increments.
Examples:
Binding Edge Erase value: 0 mm
• Your bound original is a spiral-bound book and you
want to copy both the right and left pages of the book.
• You select Left Page Then Right.
• You do not increase the Binding Edge Erase value;
therefore, the Binding Edge Erase value is 0 mm.
• You make a copy of the left and right side pages of
your book. The copy output shows the copies with
black marks along the binding edge:
Binding Edge Erase value: 10 mm
• Using the same bound original, you select Left Page
Then Right.
• Increase the Binding Edge Erase to 10 mm.
• You make a copy of the left and right side pages of
your book. The copy output shows the copies without
black marks along the binding edge, and you have a
crisp, white copy of the pages:
xjdhjcjhkjs
sjhfjhksfh
kshdhfd
kshfkhf’
skhfk
shfjdka
fh8&02034
xjdhjcjhkjs
sjhfjhksfh
kshdhfd
kshfkhf’
skhfk
shfjdka
fh8&02034
xjdhjcjhkjs
sjhfjhksfh
kshdhfd
kshfkhf’
skhfk
shfjdka
fh8&02034
xjdhjcjhkjs
sjhfjhksfh
kshdhfd
kshfkhf’
skhfk
shfjdka
fh8&02034