Filter
Top Products
Layout Adjustment
59
Binding Edge Erase
Erases printing of the center binding area of the book that tends to be shadowed due
to the fold in the pages. Use the scroll buttons to specify the area to be erased from the
center of an open book within the range of 0-50 mm (0.0-2.0 inches) in 1 mm (0.04 inch)
increments.
2 Sided Book Copying
This feature allows you to make double-sided copies in the same order and image
layout as the original bound document, using the document glass. A blank sheet is
automatically inserted as the first page.
1.
Select [2 Sided Book Copying]
on the [Layout Adjustment]
screen.
2.
Select the required options.
3.
Select [Save].
NOTE: This feature and the [Book Copying] or [Build Job] feature cannot be activated
simultaneously.
Off
Disables the feature.
Left Page then Right
Copies both pages of an open book in the direction from left to right.
Start & End Pages
Displays the [Starting & Ending Pages] screen where you can specify the start page
and the end page for copying. The specified page sides must be identified using the
bound original.
Binding Edge Erase
Erases printing of the center binding area of the book that tends to be shadowed due
to the fold in the pages. Use the scroll buttons to specify the area to be erased from the
center of an open book within the range of 0-50 mm (0.0-2.0 inches) in 1mm (0.04 inch)
increments.
Original Size
This feature allows you to set the size of the document automatically, to select from a
list of preset sizes, or to mix different size documents. If you select a preset size,
documents will be copied according to the specified size regardless of their actual size.
1.
Select [Original Size] on the
[Layout Adjustment] screen.
2.
Select the required option.
3.
Select [Save].
Auto Detect
Automatically detects the size of standard sized documents.