Filter
Top Products
Quick Steps For Connection & Setup
Chapter 2: Connecting to Your Network ❖ 2-5
Quick Steps For Connection &
Setup
Quick Steps for printer connection and setup, for use by
the experienced System Administrator, are provided
within this section.
Quick Steps common to virtually all platforms include:
1. Install cabling to link the Network Interface to your
network.
2. Print a Configuration Sheet to determine the printer’s
current Network settings. See the section “Print the
Configuration Sheet” (page 2-21)
.
3. If you are connecting this printer using TCP/IP
protocol, refer to the section “Set An IP Address”
(page 2-6)
.
4. Go to the appropriate chapter(s) within this Technical
Information Guide (TIG) covering your workstation
Operating System and follow the setup instructions
provided.
5. If your job doesn’t print correctly, refer to the
Troubleshooting section within the applicable
Operating System chapter of this TIG for
problem-solving information.