Filter
Top Products
Windows Troubleshooting
Chapter 4: Windows / Peer-to-Peer Network Setup ❖ 4-23
Windows 95/98
Troubleshooting for
DocuPrint Network
Printers
This troubleshooting section assumes:
• You have verified the operation of the printer using the
procedures found in Chapter 2: Connecting to Your
Network.
• You have loaded a DocuPrint PCL or PostScript print
driver.
• You have printed and retained a current copy of the
Configuration Sheet.
1
Verify this item in the Ethernet Menu area of the
Configuration Sheet:
• NetBEUI Enable is set to On.
2
Verify that the NetBEUI PDL is properly set depending on
your driver.
3
From a workstation desktop use the right mouse button
and select Network Neighborhood then with the left
mouse button select Properties from the cascade menu.
4
The Network dialog will appear. Select the
Configuration
tab.
5
Check the list of installed network components for the
following items:
• Xerox Peer to Peer
• Client for Microsoft networks
•NetBEUI
6
If you have elected to run CentreWare DP, make sure of
the following:
• Novell Networks:
You are required to load Novell IntraNetWare Client or
Client for IPX printer discovery.
•TCP/IP Networks:
No additional software is required but your printer
must have a valid TCP/IP address assigned.