Filter
Top Products
Macintosh Driver Installation
5-6 ❖ DocuPrint Technical Information Guide
Selecting the Printer from the Chooser
Before you send a print job to the DocuPrint printer, make
sure that it is selected as the current printer in the
Chooser.
1
At the printer, print a configuration sheet and note the
printer address
. Refer to the section
“Print the
Configuration Sheet” (page 2-21)
.
2
At your computer, select the APPLE in the upper left
corner of the Desktop.
3
Select the
Chooser
entry in the menu.
4
Make sure that
AppleTalk
is active.
5
In the left window of the Chooser, click on the
Adobe PS
icon to select it. You may have to use the scroll bars at the
right side of this box to locate the icon.
Your network may be divided into AppleTalk
Zones. You can tell if there are zones by the
appearance of the CHOOSER window. When the
CHOOSER program detects multiple zones, the left
window will be reduced in size. The lower half of
the CHOOSER window will be a zone list. Identify,
then select the zone in which the DocuPrint
printer is located.
6
When you select a zone, printer names appear in a box to
the right.
7
Select the
printer address
from the window to the right.
8
Click
Setup
...
If you do not use the DocuPrint driver, you may
not be able to take advantage of all of the printer’s
features.
Before continuing, make sure that the software included with
your customer documentation set has been loaded into each
Macintosh computer that will be sending jobs to the DocuPrint
printer.