Filter
Top Products
Windows NT 4.0 Network
4-16 ❖ DocuPrint Technical Information Guide
Quick Install Steps
(DLC/LLC Protocol)
1
At the Desktop, right mouse click the Network
Neighborhood icon and select
Properties
.
2
Click on the
Protocols TAB
and verify that the
DLC/LLC
protocol
has been loaded.
3
If this software is not present, install it using the
documentation provided by Microsoft. Then return to
this document.
4
Open the
Control Panel
and double-click
Printers
icon.
5
Double-click
Add Printer
.
6
The
Add printer Wizard
starts.
7
Verify that My Computer is selected and click
Next>
.
8
Click
Add Port
.
9
Select the
Hewlett-Packard Network Port
in the
Available Print Monitors box and click
OK
.
10
Enter a unique name for the port to be used in the area
provided.
11
Choose the
Port Address
from the list of ports.
12
Click
Timers
and verify that the
Job Based
connection is
selected then click
OK
.
13
Click
OK
. The Wizard will return you to the previous
dialog. Verify the new port name you entered is in the list
and correct. The check box to the left of the port name
must be checked if it is not, check it then select
Next>
.