Filter
Top Products
NetWare Troubleshooting
3-8 ❖ DocuPrint Technical Information Guide
5
Review the Connectivity Settings and check for these
things:
• NetWare is enabled.
• Frame Type matches the frame type of the desired
fileserver.
To determine your NetWare IPX frame type, type
config at the Novell console screen. On large
networks, using multiple IPX frame types, it is
CRITICAL that the frame type be set correctly.
• PDL is set to your desired PDL (PostScript or PCL 5e) or
to Auto.
• Primary Server (for NetWare 3.1X only) is set to the
name of the server which serves the print queue you
have assigned to the DocuPrint printer.
• NDS Tree (for NetWare 4.1X NDS and later) is set for the
correct NDS tree name.
• NDS Context (for NetWare 4.1X NDS and later) is set
for the correct NDS Context.
• Print Server (PServer) Name is set for the name selected
for this DocuPrint printer to act as a print server.
• Novell Mode is correctly set.
6
If any changes are made, reset the or if connected to the
network with an External Ethernet Adapter, power cycle
the Adapter. Once the printer has been reset, allow the
printer approximately two minutes to go through self test
and then log into the network server.
7
Print out another Configuration Sheet to verify the items
you modified were set and retained.