Filter
Top Products
Windows 95/98 Peer-to-peer Network (Peer-ro-Peer IPP)
Chapter 4: Windows / Peer-to-Peer Network Setup ❖ 4-11
Windows 95/98 Peer-to-peer
Network (Peer-ro-Peer IPP)
Requirements
• A printer with appropriate cabling connected to your
network.
• A workstation with Windows 95/98 software and the
Microsoft IPP Client for Windows 95/98 installed.
The Microsoft IPP Client can ve down-
loaded from the Microsoft Corporatio web site.
• A working knowledge of Windows 95/98
Step-by-Step Setup
(Peer-to-Peer)
1
Print a Configuration Sheet. Details are in
Chapter 2: Connecting to Your Network
,
“Print the
Configuration Sheet” (page 2-21)
. Retain this page for
reference.
2
Check the Configuration Sheet and verify that the IPP
protocol is enabled and note the IPP print queue name.
3
Load your DocuPrint CD.
4
Run the
CD Navigator
on your DocuPrint CD-ROM (run
setup32.exe). Select your language.
Select “Install Printer
Drivers.” Follow the instructions on the screen.
5
Restart your PC.
6
Select the
Start
button, select
Settings
, select
Printers.
7
Select the printer model you just installed.
8
Select
File
, then select
Properties
.
9
Select
Add Port. . .
10
Select
Network
and then enter the IPP print qurur name,
including the URL, in the network path field, click
OK
.
11
Back in the properties for the printer, select
General
and
click
Print Test Page.